No matter what your reasons may be you’ve decided its’ time to remove that old faded bumper sticker from your vehicle. Lucky for you in just a few minutes and with a small amount of effort your car can be bumper sticker free. This process can be repeated for just about any type of adhesive stuck to your vehicle. It can be used to remove inspection stickers from windows, or vinyl lettering/vinyl graphics from the vehicle as well. The most important part is to be very patient and not try to rush through any steps. All of the steps below should be completed in a garage, under a carport or during dawn/dusk to provide as much time as possible before the adhesive remover dries on the car.
What You Will Need:
Razor Blade (Single Sided Square Blade Recommended)
Citrus Based Adhesive Solvent (Goo Gone Automotive Cleaner Recommended)
Automotive Paint Safe Bug Brush (Can be purchased at Walmart, or any auto parts store)
STEP #1: Take your razor blade and carefully slide the edge of the blade under a corner of the sticker. With the edge of the razor blade under the sticker gently tease up the corner of the sticker.
STEP #2: Grab the freed corner of the sticker and slowly pull the sticker in the direction of the remaining sticker. NOTE: If the sticker becomes too difficult to pull without tearing, apply your citrus based adhesive solvent to the adhesive sticker backing during this step. The solvent will loosen the adhesive, making it easier to remove the sticker. It is recommended to wait at least one minute to allow the solvent to penetrate and break down the adhesive.
STEP #3: Once you have removed the entire sticker, there will still be bumper sticker adhesive left behind. Now apply the citrus based adhesive remover to your automotive paint safe bug brush. Using the bug brush, apply some citrus based adhesive remover to the remaining adhesive on the vehicle in a circular motion. NOTE: This step may will most likely have to be repeated in order to remove all the adhesive from the vehicle. To ensure everything is removed, run your hand across the area once dried. Any remaining sticker glue will create a rough/sticky feeling. If there is still some leftover then repeat step #3. If there is no residue or leftover you may proceed to step #4.
STEP #4: Remove the excess adhesive remover with your microfiber towel.
Note: There will be some slight scuff/mar marks as well as a discoloration of the paint depending on how long the bumper sticker was on the car. This will need to be removed by compounding and polishing the area to smooth out any blemishes and blend the clear coat to match the rest of the bumper.
STEP #5: Now that the bumper sticker has been removed and all adhesive cleaned up it is time to make it look like the rest of the bumper. Follow the steps on how to properly compound and polish a car to remove light swirls and scratches.
STEP#6: Inspect the area where the sticker was to ensure it is satisfactory. Remember to apply a couple coats of wax, since it has been a long time since this portion of the bumper saw any.
Removing a bumper sticker can seem like an insurmountable task, and often people will give up because of the difficulty. With a little patience, the right tools and know how anyone can learn how to properly remove a bumper sticker without any blemishes to the paint.